Page 2 of 2

All in one operation, that amazing neck joint is done:

It's not all machine work.

A guitar body in a finish sanding work station gets hand work using an air driven orbital sander:

Those large slots in the workbench are vents through which air and sawdust exits the work area.

This is the famous ultraviolet finish curing booth:

Guitars go in there right from the spray department, and are exposed to high intensity ultraviolet radiation, which cures the finish in about 20 seconds.

A line of buffing machines wait for their operators to come back from lunch:

These guitar have just had their bridges clamped in place, and will be ready for neck attachment tomorrow:


Back to Index Page